V-Seal 102

V-SEAL_102V-Seal 102 Winter Guard is a chemically reactive penetrating sealer that permanently fuses within porous broom finish concrete and porous concrete block (CMU block). V-Seal 102 will significantly increase surface strength, combat freeze/thaw damage, and limit penetration of stains such as oil, gas, grease, and salt.

V-Seal 102 reduces dusting, retards mold and mildew, restricts efflorescence and hydrostatic moisture, and imparts waterproof characteristics. V-Seal 102 is breathable with minimal impact to traction coefficient. V-Seal 102 creates a cross-linked insoluble internal membrane barrier that will wear away only if the substrate itself wears away below sealer penetration.

V-Seal 102 has been tested to exceed ASTM C666 Freeze/Thaw Test 1000+ cycles .0096 (standard 300 cycles .060) and pass ASTM C672 Scaling Resistance Test (with no scaling). V-Seal 102 meets all criteria of ASTM C156, ASTM C309, and AASHTO M128 – Liquid Membrane-Forming Curing Compound.

Recommended Uses

Liquid membrane-forming curing compound for curing new broom finish concrete and sealing existing broom finish concrete and porous concrete block. V-Seal 102 is recommended for residential and commercial structures such as roads, driveways, parking decks, sidewalks, patios, poured concrete and black walls, including basement walls. This product is suitable for interior and exterior, horizontal and vertical, above and below grade applications. V-Seal 102 is compatible with most glues, mastics, and topical coatings.

Coverage

Broom Finished Concrete: 200-300 sq.ft./Gal